Concrete Testing Equipments Manufacturer, Suppliers and Exporter in India

Touch Screen Compression Machine 3000kN

Product Code : TVT-CTE-10430

Newly upgraded model with brand new outlook. Old AC motor replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Digimatic Compression Machine 2000kN

Product Code : TVT-CTE-10431

Compression & Flexural New digimatic compression machine are special designed extremely strong and oversized to grant high rigidity and stability during testing.

Note:

Digital Concrete Test Hammer

Product Code : TVT-CTE-10432

Concrete Strength Evaluation Equipped with an electronic transducer that measures the rebound values and supplies automatically the results on a graphic display.

Note:

Accessories For Mould

Product Code : TVT-CTE-10433

Note:

100mm Cube Lower Platen Piece

Product Code : TVT-CTE-10434

Compression Accessories Platen with polish surface & cube located guide indication, surface hardness over 55 HRC.

Note:

Block Test Compression Platen Set

Product Code : TVT-CTE-10435

Compression Accessories To be used with 2000 kN compression machine equipped with rectangular platen 500 x 270 mm to test block specimen

Note:

Portable Flexural Test Device

Product Code : TVT-CTE-10436

Flexural Test Able to carry out 3 point test with single upper roller. Economical & simple device can fitted to all type of compression machine to carry out flexural test.

Note:

Unbonded Capping Retainers

Product Code : TVT-CTE-10437

Unbonded Capping Pad Two steel capping retainer are applied on cylinder top & bottom surface & two neoprene pads are place between specimen & retainer disc.

Note:

Analogue Compression Machine 2000kN

Product Code : TVT-CTE-10438

Compression Test Newly upgraded model with brand new outlook. Old AC motor replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Touch Screen Compression Machine 2000kN

Product Code : TVT-CTE-10439

Compression And Flexural Newly upgraded model with brand new outlook. Old AC motor replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Welded Frame Compression Machine 3000kN

Product Code : TVT-CTE-10440

Old AC motor had replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption. Extra improvement on safety feature with fully protection cover & piston travel protection switch cover. New

Note:

Touch Screen Welded Frame Compression Machine 2000kN

Product Code : TVT-CTE-10441

Compression & Flexural It equipped with imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Automatic Compression Machine (Welded Frame) 5000 kN

Product Code : TVT-CTE-10442

Compression And Flexural Dual channel system enables the calibration to be done independently for each frame.

Note:

Full Auto Comp cw Controls Automax E-Modulus

Product Code : TVT-CTE-10443

Higher Compression frame is extremely strong and oversized to grant high regidity and stability. The upper head holds the precision lapped ball seating and the compression platen.

Note:

Analogue Compression Machine Light Duty

Product Code : TVT-CTE-10444

Extra improvement on safety featured. Special design for brand new outlook.

Note:

Compression Machine (Light Duty) 2000kN

Product Code : TVT-CTE-10445

Old AC motor replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Touch Screen Machine 2000kN

Product Code : TVT-CTE-10446

Compression And Flexural Old AC motor had replaced by new imported DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Automatic Touch Screen Compression Machine 3000kN

Product Code : TVT-CTE-10447

Compression And Flexural Newly upgraded model, rigid, compact & with brand new outlook.

Note:

Compacting Factor Apparatus

Product Code : TVT-CTE-10448

Workability & Consistency This apparatus uses for determination of the compacting factor of concretes with low, medium and high workability.

Note:

Compressometer Extensometer Apparatus

Product Code : TVT-CTE-10449

Strain & Deformation Used to determine the strain and deformation characteristics of concrete cylinder specimens.

Note:

Flow Table Apparatus 30kg

Product Code : TVT-CTE-10450

Workability & Consistency This apparatus comprises a steel flow table, conical mould and wooden tamper.

Note:

Concrete Penetration Apparatus

Product Code : TVT-CTE-10451

Setting Time by Penetration Used to determine the setting time of the mortar fraction in concrete mixes with slump greater than zero, by testing mortar sieved from mix.

Note:

Vebe Consistometer Apparatus

Product Code : TVT-CTE-10452

Workability & Consistency The small vibrating table operates at a fixed amplitude and frequency, and in the test a plastic disc is placed into contact with the upper surface of the concrete.

Note:

Vebe Consistometer 110kg

Product Code : TVT-CTE-10453

Workability & Consistency The test can be performed on both laboratory and field prepared freshly mixed concrete with a maximum aggregate aggregate size 22” (50mm) or less.

Note:

Coring Machine 4 Stroke Petrol Engine

Product Code : TVT-CTE-10454

Drilling & Coring Special cast aluminium main frame solid vertical movement pole and strong steel base with 4” Delrin wheels.

Note:

Hand Held Coring Machine

Product Code : TVT-CTE-10455

Sample Preparation (Cutting) Features include with safety friction clutch, it is easy, safe and reliable to use.

Note:

Coring Machine 18kg

Product Code : TVT-CTE-10456

Drilling Machines Features include a side guard and a drainage water outlet.

Note:

Coring Machine 2 in 1 Version (Heavy Duty)

Product Code : TVT-CTE-10457

Coring Equipment Smart LED indicator light hold warning of overload, overheat and carbpn brush replacement.

Note:

Galvanized Curing Tank With Drain Valve

Product Code : TVT-CTE-10458

Note:

Plastic Curing Tank

Product Code : TVT-CTE-10459

Note:

Curing Tank Heavy Duty Plastic

Product Code : TVT-CTE-10460

Specimen Curing Made from polyethylene material, extremely robust and stable, ideal for site laboratories.

Note:

Thermostatic Control Curing Tank

Product Code : TVT-CTE-10461

Specimen Curing Made from galvanized steel sheet on tank body, rest of accessories fully hot – deep galvanized coated against corrosion.

Note:

Accelerating Concrete Curing Tank

Product Code : TVT-CTE-10462

Harden Concrete Test It is a kind of special device for quality control of concrete. Applicable for accelerating curing for concrete at construction site and scientific research institute for prefabricate.

Note:

100kN Hydraulic Flexural Frame

Product Code : TVT-CTE-10463

Flexural Test Overall structure are rigid & compact.

Note:

Flexural Machine

Product Code : TVT-CTE-10464

Flexural Test Overall structure are rigid & compact. Using DC motor for more durability, low noise pollution, low oil temperature & low power consumption.

Note:

Digimatic Flexural Mortar Compression Machine 100 300 kN

Product Code : TVT-CTE-10465

Flexural and Low Strength Compression A simple and practical frame design for testing concrete beam and with additional optional device for testing mortar specimen, two prestress coulmn design include pressure transducer, loading rate control knob and di

Note:

Cylinder Capping Equipment

Product Code : TVT-CTE-10466

Sample Preparation for the Compression Test Used to assure plane end surfaces perpendicular to the axis of the cylinder during the capping.

Note:

Capping Gypsum Compound

Product Code : TVT-CTE-10467

Capping Compound Gypsum is a fast,safer,easier and cheaper method compound with sulfure capping,rubber pad capping and grinding process.

Note:

Cylinder Capping Sandbox Method

Product Code : TVT-CTE-10468

Cylinder Capping Sample With two box centering stopper intergral with horizontal plane of the frame, mechanical locking system specimen guide system and some with small vibrating platform.

Note:

Concrete Flow Table Apparatus

Product Code : TVT-CTE-10469

Workability & Consistency Used to determine the workability & consistency of fresh concrete.

Note:

Kelly Ball Apparatus

Product Code : TVT-CTE-10470

Workability & Consistency A simple penetration device for measuring the workability of fresh concrete. Construct from solid machined steel and rust-resistance finish.

Note:

Splitting Tensile Device

Product Code : TVT-CTE-10472

Splitting Tensile Test To perform tests on cylindrical specimens of various diameter.

Note:

Slump Cone Test Apparatus

Product Code : TVT-CTE-10473

Workability & Consistency Used to determine the workability & consistency of fresh concrete.

Note:

Portable Slump Cone Apparatus

Product Code : TVT-CTE-10474

Workability & Consistency Manufactured from sheet steel with chrome plated again corrosion.

Note:

Cast Iron Beam Moulds

Product Code : TVT-CTE-10475

Note:

Cast Iron Cube Mould (L-Shape)

Product Code : TVT-CTE-10476

Making Concrete Specimens We provide wide range of high quality concrete specimens mould such as cube, cylinder & beam with difference kind of size.

Note:

Cube Mold with Cast Iron

Product Code : TVT-CTE-10477

Making Concrete Specimens We provide wide range of high quality concrete specimens mould such as cube, cylinder & beam with difference kind of size.

Note:

Cast Iron Cylinder Mould

Product Code : TVT-CTE-10478

Note:

Mild Steel Beam Moulds

Product Code : TVT-CTE-10479

Making Concrete Specimens We provide wide range of high quality concrete specimens mould such as cube, cylinder & beam with difference kind of size.

Note:

Mild Steel Cube Moulds

Product Code : TVT-CTE-10480

Note:

Mild Steel Cylinder Moulds

Product Code : TVT-CTE-10481

Note:

Plastic Moulds

Product Code : TVT-CTE-10482

Note:

150mm Hybrid Fibre Plastic Cube Mould

Product Code : TVT-CTE-10483

Making Concrete Specimens Require a simple clean and demould oil before being ready to use.

Note:

100mm Hybrid Fiblre Plastic Cube Mould

Product Code : TVT-CTE-10484

Making Concrete Specimens The specimen is expelled from the mould by compressed air or water.

Note:

Vibrating Table

Product Code : TVT-CTE-10485

Concrete Compaction Equipped with motor having 3000 / 3600 r.p.m. vibration per minutes.

Note:

Pull Out Test Apparatus

Product Code : TVT-CTE-10486

Strength Evaluation The load application is achieved via a hand operated hydraulic pump.

Note:

Digital Pull Out Tester

Product Code : TVT-CTE-10487

Strength Evaluation It is suitable up to 32 mm sample. The Pull Out Test Apparatus are available in Digital Load Gauge, has 30 tons capacity hydraulic jack and hand pump.

Note:

Pull Out Tester 50kN

Product Code : TVT-CTE-10488

Strength Evaluation It is suitable up to 12 mm sample. It’s a portable anchor rods, steel rod, expansion bolts and other anchoring device.

Note:

L - Box

Product Code : TVT-CTE-10489

Passing Ability Used to asses the passing ability of self-compacting concrete to flow through without segregation on specified gaps of steel bars blocking.

Note:

Portable Specimen Cutting Machine

Product Code : TVT-CTE-10490

Sample Preparation for the Compression Test It comes together with special design solid clamping device to allow all kind of irregular specimens to be held firmly position during the cutting operation.

Note:

Portable Specimen Cutting Machine 450mm Dia Blade

Product Code : TVT-CTE-10491

Sample Preparation (Cutting) This unit machine has been specially developed to cut rock flagstones and core samples.

Note:

Specimen Cutting Machine

Product Code : TVT-CTE-10492

Sample Preparation for the Compression Test It comes together with special design solid clamping device to allow all kind of irregular specimens to be held firmly position during the cutting operation.

Note:

V - Funnel

Product Code : TVT-CTE-10493

Filling Ability Used to asses the filling ability of self-compacting concrete to flow through narrow opening without segregation or blocking.

Note:

Shrinkage Mould 75 X 75 X 300mm

Product Code : TVT-CTE-10494

Shrinkage / Restrained Expansion Used for the determination of linear shrinkage of concrete specimen.

Note:

Concrete Test Hammer High Strength

Product Code : TVT-CTE-10495

Concrete Strength Evaluation Fully aluminium casing, high quality internal mechanism, extra durability up to 300,000 test cycle and with additional soft silicone cap for comfortable usage.

Note:

Digimatic Concrete Impermeabilty Apparatus

Product Code : TVT-CTE-10496

Water Penetration Under Pressure The water under controlled pressure by fully automatic digital control panel with high precision pressure tranducer for fined and precision pressure conctrols.

Note:

Air Entrainment Meter Apparatus (Water Column Type)

Product Code : TVT-CTE-10497

Concrete Air Content Made from cast aluminium alloy. With 5 litres capacity, transparance scale tube & pressure indicator.

Note:

Air Entrainment Meter (8 Litres)

Product Code : TVT-CTE-10498

Concrete Air Content An aluminium vassel connected to the measuring gauge showing directly the air content in percentage.

Note:

Air Entrainment Meter (7 Litres)

Product Code : TVT-CTE-10499

Concrete Air Content The test procedure equalizes a known volume of air in the pressure chamber.

Note:

Air Entrainment Meter 7 Litres (E-Version)

Product Code : TVT-CTE-10500

Concrete Air Content It consists of an aluminum vessel with built in hand operated pressure pump,a precision pressure gauge with 95 mm Dia.

Note:

Initial Surface Absorption Apparatus

Product Code : TVT-CTE-10501

Surface Water Absorption To asses the concrete surface absorption characteristics. The rate of flow of water per unit area into a concrete surface when subjected to a constant head of 200 mm is measured.

Note:

Electrical Drum Mixer

Product Code : TVT-CTE-10502

The characteristics of concrete mixer : *Device for absorbing vibrations: it reduces to the least the vibrations produced by electrical motor, for a more noiseless machine that has a long duration in time.

Note:

Concrete Pan Type Mixer (Forced Speed)

Product Code : TVT-CTE-10503

Making Concrete Specimens The pan & the mixing gears have big thickness ratio, the gears are from hardened & rectified steel, the motor reducer is in oil-bath with Gleason conical coupling.

Note:

Diesel Engine Poker Vibrator

Product Code : TVT-CTE-10504

Concrete Compaction Ideal for internal compaction of concrete specimens.

Note:

Electrical Poker Vibrator

Product Code : TVT-CTE-10505

Concrete Compaction Ideal for internal compaction of concrete specimens.

Note:

Crack Detection Microscope Meter

Product Code : TVT-CTE-10506

Concrete Crack Detector This high definition microscope operates with an adjustable light source powered by batteries provides a well illuminated scale under all working conditions.

Note:

J - Ring Appratus

Product Code : TVT-CTE-10507

Self Compacting Concrete The time required (500) for concrete to flow to a diameter of 500 mm is also measured.

Note:

Sieve Segregation Test Set

Product Code : TVT-CTE-10508

Sieves Segregation Used to determining the sieve segregation resistance of self-compacting concrete (Not applicable for concrete containing fibres or lightweight aggregate).

Note:

Digimatic Load Cell

Product Code : TVT-CTE-10509

Load & Force Verification It consists of high quality steel block, named sensitive element, where strains have been fitted: the whole is housed in sheathing.

Note:

Digimatic Load Cell 300kN

Product Code : TVT-CTE-10510

Load & Force Verification It consists of high quality steel block, named sensitive element, where strains have been fitted: the whole is housed in sheathing.

Note:

100kN Digimatic Load Cell

Product Code : TVT-CTE-10511

Load & Force Verification It consists of high quality steel block, named sensitive element, where strains have been fitted: the whole is housed in sheathing.

Note:

5000kN Digimatic Load Cell

Product Code : TVT-CTE-10512

Load & Force Verification It consists of high quality steel block, named sensitive element, where strains have been fitted: the whole is housed in sheathing.

Note:

Acrylic Flow Table

Product Code : TVT-CTE-10513

Self Compacting Concrete Suitable for aggregate with maximum particle size of less tahn 40 mm.

Note:

K Slump tester

Product Code : TVT-CTE-10514

Concrete Evaluation Used for rapid assessment of the flow & consistancy of freshly mixed concrete.

Note:

Specimen Grinding Machine

Product Code : TVT-CTE-10515

Specimen Flat Polishing The machine is equipped with Ø 200 diamond grinding wheels on two power heads.

Note:

Specimen Grinding Machine (Fully Enclosed Version)

Product Code : TVT-CTE-10516

Specimen Flat Polishing The machine are fully enclose design for maximum safety protected again abrasive dust and noise polution.

Note:

Surface Grinding Machine

Product Code : TVT-CTE-10517

Specimen Flat Polishing The machine comes complete with a simple and reliable water recirculation system.

Note:

Concrete Pocket Penetrometer

Product Code : TVT-CTE-10518

Concrete Evaluation Used for rapid assessment of the flow & consistancy of freshly mixed concrete. Test results can be correlated again the slump values.

Note:

Waltz Container

Product Code : TVT-CTE-10519

It consist of metal box with powder coating with internal dimnesions of 200 X 200 X 400mm height. Used for measure the consistency of fresh concrete.

Note:

Admixtures Tank

Product Code : TVT-CTE-10520

Mixtures of Elements Used to determine the bleeding of concrete, mortar and grout. Made of fully stainless steel material complete with top corner and tamper.

Note:

U-Shape Box

Product Code : TVT-CTE-10521

Concrete Density Test The bars have dia. 10 mm and the light between them is 35 mm.

Note:

Concrete Pipe Tester

Product Code : TVT-CTE-10524

Compression & Flexural Designed and manufactured to test concrete sewer and drain pipes used in drainage works,water and irrigation supply system etc.

Note:

Ultrasonic Detector

Product Code : TVT-CTE-10523

Concrete Detector Quick detection of integrity of foundation pile continous wall with Ultrasonic penetration method.

Concrete Culverts Tester

Product Code : TVT-CTE-10525

Compression Designed and manufactured to test concrete culverts, sewer and drain pipes used in drainage works, water and irrigation supply system etc.

Note:

Flexural Testing Machine

Product Code : TVT-CTE-10526

Breaking & Compression Strength Consist with two layer rounded metal bearers in a horizontal plane whose centers are spaced of the hanging length of the specimen to be tested, and a single rounded metal upper bearer positioned centrally between the t

Note:

Twin Shaft Paddle Concrete Mixer

Product Code : TVT-CTE-10527

Concrete Mixing concrete mixer able to produce uniform, efficient and fast mixture action, come with easy drum tilting mechanism discharge system for fast mixture discharge and easy cleaning.

Note:

Horizontal Drum Mixer

Product Code : TVT-CTE-10528

Concrete Mixing The machine is simple, high efficiency stirring, residual small, easy to clean and ideal for laboratory mixer with concrete.

Note:

Shrinkage Mould detemination

Product Code : TVT-CTE-10529

Shrinkage Determination Used for determination of linear shrinkage of concrete.

Note:

Low Strain Pile Integrity Tester

Product Code : TVT-CTE-10530

Application Low strain pile integrity testing by reflected wave method

Note:

Rebar Corrosion Tester

Product Code : TVT-CTE-10531

Concrete Corrosion Testing The steel corrosion on the structure of concrete reduces the effective section area of steel and increases in volume, which leads to the expansion of concrete, spalling, reinforcement of steel and concrete, and the reduction of

Note:

Concrete Carbonation Test Chamber

Product Code : TVT-CTE-10532

Carbonation Testing For the determination of the required temperature and humidity conditions, at a certain (20% or less) of carbon dioxide gas in a concrete specimens carbonation depth.

Note:

TVET Console Unit

Product Code : TVT-CTE-10533

Compression Control System Stand-alone power and control console unit, using DC Motor couple with 5 element radius injection hydraulic pump and able to perform with dual frame on compression both high and low range. (Applicable For Compression 50 KN - 3

Note:

Rapid Chloride Permeability Tester

Product Code : TVT-CTE-10534

The Rapid Chloride Permeability Tester independently developed has a friendly human-machine interface. With automatic acquisition, measurement and control system, the test results are very accurate.

Note:

Rebar Scanner

Product Code : TVT-CTE-10535

The ergonomics design, make it easy to use for long hours. The host is equipped with touchable full colour LCD Screen , 854 x 480 with clear interface.

Note:

Scanner Rebar

Product Code : TVT-CTE-10536

The ergonomics design, make it easy to use for long hours. The host is equipped with touchable full colour LCD Screen , 854 x 480 with clear interface.

Note:

50kN Digimatic Load Cell

Product Code : TVT-CTE-10537

Load & Force Verification It consists of high quality steel block, named sensitive element, where strains have been fitted, the whole is housed in sheathing.

Note:

Concrete Test Hammer

Product Code : TVT-CTE-10539

Concrete Strength Evaluation Fully aluminium casing, high quality internal mechanism, extra durability up to 50,000 test cycle and with additional soft silicone cap for comfortable usage.

Note:

Melting Pot 5 Litres

Product Code : TVT-CTE-10540

Compound Melting Inner pot is non-stick encased in a metal jacket with fibreglass and air insulation, keeping heat loss to a minimum.

Note:

Digital Pull Off Tester 25kN

Product Code : TVT-CTE-10541

Strength Evaluation It tests at any measuring point on the component, without requiring specimen preparation.

Note:

Budget Melting Pot

Product Code : TVT-CTE-10542

Compound Melting Inner pot is non-stick encased in a metal jacket with fibreglass and air insulation, keeping heat loss to a minimum.

Note: