Aggregate & Rock Testing Equipments Manufacturer, Suppliers and Exporter in India

Tvet Equipments is leading Aggregate & Rock Testing Equipments Manufacturer,and supplier and Exporter in India

Tvet Equipments is one of the established aggregate testing equipment manufacturers in India, producing laboratory instruments that determine whether crushed stone, gravel and sand are fit for road pavements, railway ballast, concrete and asphalt. This category brings together 45 individual products: from a Los Angeles Abrasion Apparatus and Aggregate Impact Value Apparatus for strength and wear, through flakiness and elongation gauges and multi-motion sieve shakers for shape and grading, to a complete rock testing equipment sub-range for geotechnical and mining laboratories. Every item is built at our works in Greater Noida (Delhi NCR), Uttar Pradesh, and supplied against IS, ASTM, BS and EN test methods so that results are accepted by consultants, contractors and government approving authorities.

Because aggregates make up roughly three-quarters of the volume of concrete and the bulk of any road base, the tests on this page are the first quality gate on almost every infrastructure project. A civil engineering department needs the same core apparatus for its transportation and materials lab practicals that a highway contractor needs for site quality control, which is why our aggregate lab equipment for civil engineering colleges and our tender-grade supply to public works departments share a common specification. Buyers in the East Africa region, notably Kenya, Tanzania, Uganda and Ethiopia, generally specify the BS 812 and EN 1097 series; Indian buyers specify IS 2386. The tables below show which of our instruments satisfy each.

Aggregate Strength, Impact and Abrasion Testing Equipment

Mechanical tests measure how an aggregate behaves under traffic loading, crushing and long-term wear. These are the instruments most often listed in NHAI, MoRTH and state PWD laboratory schedules and are the heart of any aggregate testing lab. Specifications quoted below are taken from the individual product pages.

Particle Shape, Grading and Sampling Equipment

Shape and grading tests decide whether an aggregate will pack well, drain well and give a workable mix. Our flakiness and elongation index apparatus, IS test sieves and sieve shakers are supplied in matched sets so that a laboratory can run IS 2386 Part 1 in full on the day the equipment is installed.

Density, Absorption, Moisture and Rock Testing Equipment

Specific gravity and water absorption feed directly into concrete mix design, while moisture content corrects batch weights on site. The rock testing equipment group serves geotechnical consultants, mining institutes and tunnelling projects that need index properties of intact rock and discontinuities.

IS 2386 Test-to-Equipment Map

Indian tenders and college syllabi are written around IS 2386 (Methods of Test for Aggregates for Concrete). Use this map to check that a bill of quantities covers every part of the standard. The equivalent ASTM and BS/EN references are included for buyers in East Africa and other export markets who work to British or European methods.

Setting Up an Aggregate Testing Laboratory: Three Typical Configurations

Most enquiries we receive fall into one of three lab types. The list below is a planning aid, not a fixed package; our engineers adjust it to the syllabus, the approving authority or the tender schedule you are working to. See our Tenders and OEM supply page for institutional and funded-project procurement.

Why Buy Aggregate and Rock Testing Equipment from Tvet Equipments

As a TVET lab equipment manufacturer in India and engineering lab equipment manufacturer supplying polytechnics, engineering colleges and lab equipment for technical institutes, Tvet Equipments positions this range as a dedicated aggregate testing lab equipment line for civil engineering aggregate testing equipment buyers across India and East Africa. Institutional and tender buyers sourcing a complete aggregate-testing lab setup can combine this category with equipment from our other civil engineering testing ranges below.

Applications and Markets Served

Our aggregate and rock testing instruments are used in highway and expressway construction, railway ballast qualification, airport pavements, dams and canals, ready-mix and precast concrete plants, quarry and crusher quality control, geotechnical site investigation, and undergraduate and diploma teaching laboratories. Within India we supply engineering colleges and NIT/IIT-affiliated departments, state PWD and NHAI-approved laboratories, NABL-accredited commercial labs, and contractors executing national highway and metro packages.

Export supply to the East Africa region is a growing part of this category. Road-agency and university buyers in Kenya, Tanzania, Uganda and Ethiopia typically specify BS 812 and EN 1097 methods for impact, abrasion and shape testing; the equivalents column in the standards map above shows which of our instruments meet those methods. Quotations for these markets are issued as dated FOB or CIF figures with export packing included, and manuals are supplied in English. Tvet Equipments also ships to buyers in South Asia, the Gulf and Southeast Asia on request.

Explore Related Testing Equipment Categories

Aggregate results are only half of a materials report. Complete your laboratory with the rest of our civil engineering range:

• Concrete Testing Equipments: compression testing machines, slump cones, cube moulds and curing tanks for IS 516 and IS 1199.
• Cement & Mortar Testing Equipments: Vicat apparatus, Le Chatelier moulds, mortar mixers and cube vibrating machines.
• Soil Testing Equipment: CBR, Proctor compaction, triaxial and consolidation apparatus for the IS 2720 series.
• Bitumen Asphalt Testing Equipment: penetrometers, ductility machines, Marshall stability and softening point apparatus.
• Steel Testing Equipments: universal testing machines and bend-rebend testers for reinforcement bars.
• Civil Engineering Lab Equipment: general laboratory apparatus for structures, surveying and materials practicals.
• Miscellaneous Testing Equipments: balances, ovens, water baths and other supporting instruments.
• Glassware Plasticware: measuring cylinders, pycnometers and beakers used in aggregate and soil procedures.

Frequently Asked Questions

Which equipment is required for aggregate testing as per IS 2386?
A complete IS 2386 set-up needs test sieves and a sieve shaker, flakiness and elongation gauges (Part 1), a sand equivalent apparatus and drying oven (Part 2), a specific gravity frame, sand absorption cone and bulk density measures (Part 3), an aggregate impact value apparatus and Los Angeles abrasion machine (Part 4), and sieves, baskets and an oven for soundness (Part 5). All of these are available from this category.

What is the difference between aggregate impact value and Los Angeles abrasion value?
The impact value measures toughness: a sample is struck 15 times by a falling hammer and the fines produced are weighed. The Los Angeles abrasion value measures resistance to wear: the sample is tumbled with steel balls in a rotating drum. Road specifications usually set limits on both because pavement aggregates suffer both sudden loading and long-term attrition.

Do you supply rock testing equipment as well as aggregate apparatus?
Yes. The rock group in this category includes the Digimatic Point Load Tester (50 kN), Slake Durability Apparatus, Rock Shear Box, Rock Test Hammer, Barton Comb profilometer and a Laboratory Coring Machine for preparing cores.

Can the equipment be supplied to BS or ASTM methods for export projects?
Yes. The impact tester, abrasion machine, gauges and sieves are supplied in IS, BS 812 / EN 1097 or ASTM configurations. Tell us the standard in your specification and we will quote the matching version. This is the usual route for buyers in Kenya, Tanzania, Uganda and Ethiopia.

What power supply do the motorised machines need?
Motorised units such as the Los Angeles abrasion machine (220 V, 50/60 Hz, 750 W), micro-Deval machine (240 V, 1 kW) and slake durability apparatus (240 V single phase) run on standard single-phase supply. Voltage and frequency variants for export destinations are available; please state your country when requesting a quotation.

How do I get a price for a complete aggregate laboratory?
Send your list, tender schedule or syllabus through the contact page. We return an itemised quotation with technical datasheets, and for institutional or donor-funded purchases we prepare the documentation described on our Tenders/OEM page. Further general questions are answered on our FAQ page.

Request a Quote

Whether you are equipping a new transportation engineering laboratory, replacing a single aggregate impact testing machine, or sourcing a full IS 2386 / BS 812 suite for a road-agency laboratory in East Africa, Tvet Equipments can supply it from stock or to order. Browse the 45 products listed below, or contact our sales team for an itemised quotation, datasheets and delivery schedule. You can also view the complete product catalogue.

Content reviewed by Arvind Kumar, Lab Equipment Specialist (12+ years). Last updated: September 2026.