50kN Digimatic Load Cell Manufacturer,Supplier and Exporter in India
Product Code : TVT-CTE-10537
The 50kN Digimatic Load Cell is the smallest-capacity model in Tvet Equipments' load cell range, used for load and force verification/calibration of low-capacity compression, flexural and pull-off/pull-out testing machines.
How It Works
As load is applied through the testing machine under calibration, strain in the sensitive steel-block element is transmitted to an amplifier, which converts it into a digital load reading. Comparing this reading against the testing machine's own indicated load verifies the machine's force accuracy across its working range.
Technical Specifications
| Parameter | Specification |
|---|---|
| Capacity | 50 x 0.01 kN |
| Load Cell Dimension | Ø50 x 155(H) mm |
| Working Temp. (as published) | 28.4 – 31.3°C, Moisture 68-72% RH |
| Accuracy | Class ±0.5% |
| Approx. Weight | 3.2 kg |
| Power | NiCd battery, AC adaptor as charging source |
Data note: like the 100kN model in this range, this unit's published "Working Temp." figure is a narrow, specific condition (28.4-31.3°C, 68-72% RH) rather than the broad "0-45°C, ?80% RH" range published for the 300kN/2000kN/5000kN models — this recurring pattern across both smaller-capacity models reinforces that it reads as a recorded test condition rather than a stated operating range. Presented as published.
Applications
Used for load and force verification/calibration of low-capacity testing machines (such as pull-off or bench-top flexural testers) per ASTM E4 (Standard Practices for Force Verification of Testing Machines) and ISO 376 (calibration of force-proving instruments); this is the finest-accuracy model in the range at Class ±0.5%.
Related Products & Category
This machine is part of the Concrete Testing Equipments range at Tvet Equipments. Related machines include: 100kN Digimatic Load Cell, Digital Pull Off Tester 25kN.
Frequently Asked Questions
What machines is this load cell suited to?
At 50kN capacity, it suits calibrating low-capacity machines such as pull-off testers, bench-top flexural machines, and other low-range equipment in this range.
What accuracy class does this model offer?
Class ±0.5%, finer than the ±1% accuracy class published for the other models in this load cell range.
How does the published Working Temp. figure compare to other models?
Like the 100kN model, it shows a narrow specific condition (28.4-31.3°C, 68-72% RH) rather than a broad operating range — likely a recorded test condition rather than an operating spec.
Request a Quote
Looking to buy or get pricing for this machine? Request a quote from Tvet Equipments and our team will get back to you with indicative pricing and lead times.
